- Description
|
Packaging information
CTN Szie: 40 × 30 × 20 cm
G.W./CTN:10 kg
QTY/CTN:150 set/carton
Product Introduction
product material: ABS
product Name: Machine cover trim
applicable vehicle model: 17 CRV
the installation effect: the special car for the original car printing is consistent with the installation part of the original car
installation instructions:
step 1: simulate installation
adjust the position of the product to be installed on the car to the appropriate position, and pay attention to the direction and order of the product.
Step 2: surface treatment
(1) Clean
clean the parts that need to be installed with a non-fiber towel stained with alcohol or clean with clean water.
Matters needing attention:
before installation and fitting, ensure that the installation surface is clean and dry, free of dust, fiber, water stains, oil stains or other pollutants. When the operating environment temperature is below 10 degrees, be sure to heat the 3M adhesive layer on the bonding surface and the product.
For the use of tackifier, cotton swabs can use a small amount of tackifier at the position of sticky to make the paste more reliable and stable.
(2) the installation
tear off one corner of the protective film of the 3M adhesive layer on the back of the product, leave the film outside, carefully adjust the position of the product to the exact position, then tear off the film slowly, and press the product in place.
(3) static
within 48 hours after the product is installed, the paste part of the product shall not touch water, oil and dust, and shall not touch strongly to prevent the adhesive layer from cracking.
[Note]]
make sure that the car body is free of moisture or oil stains before installation. Wipe it clean with a soft cloth and paste it firmly. Do not wash the car two days after pasting. The weather is cold or wet, please pre-heat the 3m tape to make the effect better.
important Notice
1: when receiving the goods, please be sure to open the box and confirm the receipt in the presence of the courier. If you sign and confirm the express delivery form, it will be deemed that the goods are not damaged. In addition, family members, friends, colleagues, doormen, etc. are deemed to sign for the goods.
2: in order to ensure that the goods are delivered to your customers in good condition, Please unpack and accept them in front of the courier when receiving the products. There are missing items, please contact us immediately if the product is damaged (please do not sign the Express ticket). We will solve the problem as soon as possible and minimize the loss. We hope that customers can cooperate together.
3: however, we are no longer responsible for problems such as omissions and damages after the customer signs for the goods. Please supervise and understand each other!